Pressure Washer Home Contact Us
Ultimate Washer, Inc.
711 Commerce Way E, Ste 1
Jupiter, FL 33458 USA

Toll Free: 1 (866) 858-4982
Local: (561) 741-7022

On the Wire Newsletter

Sign up to receive our special deals, news & tips!

Download Our Catalog

Educational Video

GSA Ordering

Use Your Pressure Washer as a Sewer Jetter

Pressure Washer to Sewer Jetter Conversion Guide Sewer Jetter Nozzle Sewer Jetter Hose Sewer Jetter Foot Valve Hight Pressure Hose Pressure Washer Pump Sewer Jetter Pulse Valve Pressure Washer

Click on this chart to find the part, accessory or pressure washer attachments you're looking for!

How It Works

Be sure to set-up your pressure washer outside to get started if it is a gasoline powered unit. If your unit is electric, it can be placed anywhere you need to work. Attach your pressure washer hose to your pressure washer and run this hose to the inside or outside drain you want to clean. Remove your gun/wand and attach the provided sewer jetter hoses onto the hose reel and attach the desired nozzle for the job at hand. Nozzle choices are laser or corner spray. It is wise to get one of each for most applications. Purchase a foot valves for hands-free operation when your washer is not near you. Another added option making the conversion complete is a jetter pulse valve. This attachment will make your machine cavitate as it disables one of the valves on your pump manifold (center valve suggested). This cavitation will give you enhanced cleaning power as it provides more agitation within the page. You are now ready to use your existing pressure washer as a sewer jetter and clean your drain pipes.

You will always need the right part for the right job. For selecting sewer and drain jetting equipment, you can use the following charts as guidelines for selecting the appropriate equipment for your task. Please note that, while there are success stories of cleaning larger pipes with smaller machines, the figures provided in the charts are averages and represent realistic capabilities. There are variables to take into account that can and will impact the results of your jetting, such as: sewer jetting hose size and length, number of elbows and condition of the line, the power of the machine and the experience of the operator.

What size drain jetter hose should I use?

PINE LINES JETTER HOSE
1" - 4" pipe lines 1/8" size jetter hose
2" - 6" pipe lines 1/4" size jetter hose
5" - 10" pipe lines 3/8" size jetter hose
8" - 12" pipe lines 1/2" size jetter hose
FLOW IN GALLONS PER MINUTE AVERAGE PIPE SIZE
2 GPM Up to 4"
3 GPM Up to 6"
4-8 GPM Up to 8"
10-12 GPM Up to 10"
15 GPM Up to 16"
18-20 GPM Up to 24"
35 GPM & greater Up to 36"

connection size chart

Sewer Jetter Hoses

Jetter Hose
Sewer Jetter Hose

Sewer Jetter Hoses

All sewer cleaning hoses have a thermo-plastic cover coating to protect from dirt and grime, to allow for maximum flexibility while still being very light weight. These professional grade hoses are designed to take hours of usage.

  • Max Pressure: 4400 or 4800 PSI
  • Max Flow: 3.0 or 4.0 GPM
  • Max Temeprature: 160°
  • Length: 50 FT to 300 FT
  • Optional: Sewer Jetter Nozzles
  • Ideal for cleaning clogged lines and pipes

(Shipping charge of $8.95 will apply on these items if the total order is less than $69.00)

MODEL MAX PSI OPTIMAL GPM SIZE LENGTH PRICE
686200047 4800 3.0 1/8" MPT x 1/8" MPT 25 FT $28.35add to cart
686200007 4800 3.0 1/8" MPT x 1/8" MPT 50 FT $65.30add to cart
686200051 4800 3.0 1/8" MPT x 1/8" MPT 100 FT $52.05add to cart
686200053 4800 3.0 1/8" MPT x 1/8" MPT 200 FT $99.70add to cart
686200032 4400 4.0 1/4" MPT x 1/4" MPT 50 FT $72.02add to cart
686200012 4400 4.0 1/4" MPT x 1/4" MPT 100 FT $103.21add to cart
686200020 4400 4.0 1/4" MPT x 1/4" MPT 200 FT $174.45add to cart
686200050 4400 4.0 1/4" MPT x 1/4" MPT 300 FT $246.80add to cart

 

Bushing

This bushing will give your 1/8" sewer hoses a 1/4" MPT working end.

(Shipping charge of $8.95 will apply on these items if the total order is less than $69.00)

MODEL DESCRIPTION PRICE
14-0125 1/8" FNPT x 1/4" MNPT Bushing $3.65add to cart
Sewer Hoses
Features:
  • For use on sewer jetters with operating pressures of 4000 PSI or less and flow rates of 5.0 - 8.0 GPM
  • Optimum Flexibility and Light Weight
  • 2.5:1 Burst to Operating Pressure
  • Textile Braided Reinforcement
  • 160 °F Maximum Temperature
  • Glossy Black Abrasion Resistant Cover
  • Not for use with trigger gun on pressure washers

Ordering Information - FREE SHIPPING

MODEL MAX PSI OPTIMAL GPM SIZE LENGTH PRICE
686200033 4000 5.0 3/8" M x 3/8" MS 50 FT $122.10add to cart
686200021 4000 5.0 3/8" M x 3/8" MS 100 FT $219.34add to cart
686200034 4000 5.0 3/8" M x 3/8" MS 150 FT $285.20add to cart
686200011 4000 5.0 3/8" M x 3/8" MS 200 FT $397.50add to cart
686200009 4000 5.0 3/8" M x 3/8" MS 250 FT $371.50add to cart
686200035 4000 5.0 3/8" M x 3/8" MS 300 FT $576.73add to cart
686200094 4000 8.0 1/2" M x 1/2 MS 100 FT $311.25add to cart
686200062 4000 8.0 1/2" M x 1/2 MS 200 FT $483.40add to cart
686200058 4000 8.0 1/2" M x 1/2 MS 300 FT $649.45add to cart
686200120 4000 8.0 1/2" M x 1/2 MS 400 FT $950.75add to cart
686200090 4000 8.0 1/2" M x 1/2 MS 500 FT $962.05add to cart
Sewer Jetting Kits

When converting your pressure washer into a sewer jetter machine, you will find the simplicity of adding a kit. While saving 25% your kit comes with nozzles, hand carry cart, and a hose reel.

Kit Includes:
  • Nozzles: Laser, Corner, Ram (thread size depending on kit)
  • 18.13"L x 13.63"W x 1.75"H Hand Carry Cart w/ 4 Rubber Feet (Lifetime Warranty)
  • Direct hand-crank rewind with locking mechanism (3500 PSI Rated)
  • Solid Steel Construction
  • Full flow 3/8" swivel brass joint
  • Durable powder coated base and stand
  • Heavy duty grip handle
  • Inlet: 3/8" NPT
  • Outlet: 3/8" NPT
  • Capacity: 50 FT, 100 FT or 200 FT of 3/8" hose (not included)
  • 5 FT Jumper Hose
  • Ball Valve Kit w/ reducers per your selection
  • Warranty: 1 Year
  • Optional: Sewer Jetter Hose

Ordering Information - FREE SHIPPING

MODEL description LENGTH PRICE
UW-SJKIT-1/8-50 1/8" Sewer Jetting Kit 50 FT $199.05add to cart
UW-SJKIT-1/8-100 1/8" Sewer Jetting Kit 100 FT $219.65add to cart
UW-SJKIT-1/8-200 1/8" Sewer Jetting Kit 200 FT $250.25add to cart
UW-SJKIT-1/4-50 1/4" Sewer Jetting Kit 50 FT $183.25add to cart
UW-SJKIT-1/4-100 1/4" Sewer Jetting Kit 100 FT $218.10add to cart
UW-SJKIT-1/4-200 1/4" Sewer Jetting Kit 200 FT $261.40add to cart

Sewer Jetter Hoses and Nozzle Kits

Sewer Hose and Custom Drilled Nozzle Kits

This kit is configured for a low flow - low pressure system. Kits are available in 1/8" FNPT and 1/4" FNPT versions and are drilled to your machines specific pressure and flow. Designed for the do-it-yourself person to dislodge solid or partial blockages, and to flush out loose debris such as grease, hard soap, ice, leaves, or sand.

Kit Includes:
  • 3 Nozzles: Penetrator, Flusher, De-icer/ Degreaser 
  • High Quality Stainless Steel Nozzles, Very Durable
  • Orifice Cleaning Tool
  • High Impact Carrying Case for Nozzles
  • Sewer Hose, Either 50 or 100 ft Choices
  • Hose Diameter Choices are 1/8” or 1/4”
  • Safety Instructions
  • Custom Drilled to the match the PSI and GPM of your machine

Ordering Information - FREE SHIPPING

Choose pressure and flow in comments/ instructions at the shopping cart.

MODEL description LENGTH PRICE
AP-APLHA125-50 1/8" Sewer Hose/ Nozzle Kit 50 FT $183.00add to cart
AP-APLHA125-100 1/8" Sewer Hose/ Nozzle Kit 100 FT $250.00add to cart
AP-APLHA250-50 1/4" Sewer Hose/ Nozzle Kit 50 FT $223.00add to cart
AP-APLHA250-100 1/4" Sewer Hose/ Nozzle Kit 100 FT $286.00add to cart

Sewer Jetter Jetter Hose Assemblies

Blue Sewer Jetter Hose Assemblies
Features:
  • Max Pressure: 3000 PSI
  • 3/4" - 1" NPT Solid fittings on both ends
  • All of these assemlies are packaged on reels

Ordering Information - FREE SHIPPING

MODEL MAX PSI SIZE LENGTH PRICE
686200134 3000 3/4" NPT x 3/4" NPT 50 FT $1,805.80add to cart
686200135 3000 3/4" NPT x 3/4" NPT 600 FT $2,140.80add to cart
686200136 3000 1" NPT x 1" NPT 500 FT $2,378.05add to cart
686200137 3000 1" NPT x 1" NPT 600 FT $2,836.70add to cart

Large Diameter Sewer Hoses

High Pressure sewer cleaning with high flow rates requires reliable and strong hoses that will not break or tear are all important to performing where often there is an immediate response needed. The following line of sewer jetter hoses is constructed of rugged materials designed to handle the most severe and demanding conditions. Temperature ranges between -40 degrees to 160 degrees F permit good performance in diverse climates. All hoses are constructed of yellow polyolefin thermoplastic and are reinforced with a high tensile synthetic fiber. Abrasion resistant polyether cover is provided for maximum strength against cuts, abrasion, or even fungus. Hoses are 100% pressure tested and assembled in the USA. Ideal for truck and trailer mounted sewer jetters. Supported by an outstanding 6 month limited warranty. A yellow polyolefin tube, single tensile synthetic fiber braid reinforcement and abrasion resistant polyether-urethane cover. Longer lengths available on request, sizes below are standard lengths.

Sewer Hoses

A standard high pressure hose available in 5 ID sizes, these hoses are built to provide rugged and reliable service for sewer cleaning applications.

Features:
  • Rated 2500 PSI (Burst Pressure to 6250 PSI)
  • Hose Color: Orange
  • Hose ID ranges between 5/8”-1 1/2” (depending on model)
  • Available in 400,500, and 600 ft Standard Lengths
  • Continuous service from -40 to160 °F
  • Ends are MNPT (Male National Pipe Thread)
  • All Lengths Come on Cardboard Reels (Wood Reels on Request for Upcharge)

Ordering Information - FREE SHIPPING

MODEL DIAMETER LENGTH PRICE
PI-SPOR-MM10-400 5/8" 400 FT $1,200.00add to cart
PI-SPOR-MM10-500 5/8" 500 FT $1,339.00add to cart
PI-SPOR-MM10-600 5/8" 600 FT $1,607.00add to cart
PI-SPOR-MM12-400 3/4" 400 FT $1,070.00add to cart
PI-SPOR-MM12-500 3/4" 500 FT $1,337.00add to cart
PI-SPOR-MM12-600 3/4" 600 FT $1,545.00add to cart
PI-SPOR-MM16-400 1" 400 FT $1,329.00add to cart
PI-SPOR-MM16-500 1" 500 FT $1,681.00add to cart
PI-SPOR-MM16-600 1" 600 FT $1,986.00add to cart
PI-SPOR-MM20-400 1-1/4" 400 FT $2,303.00add to cart
PI-SPOR-MM20-500 1-1/4" 500 FT $2,838.00add to cart
PI-SPOR-MM20-600 1-1/4" 600 FT $3,374.00add to cart
PI-SPOR-MM24-400 1-1/2" 400 FT $3,426.00add to cart
PI-SPOR-MM24-500 1-1/2" 500 FT $4,242.00add to cart
PI-SPOR-MM24-600 1-1/2" 600 FT $5,059.00add to cart
Sewer Hoses

The blue line of standard high pressure hoses is available in 3 ID sizes. These groups of sewer jetter hoses assemblies are considered for mid-range drain jetting needs.

Features:
  • Rated 3000 PSI (Burst Pressure to 7500 PSI)
  • Hose Color: Blue
  • Hose ID ranges between 3/4”-1/2” (depending on model)
  • Available in 400,500, and 600 FT Standard Lengths
  • Continuous service from -40 to150 °F
  • Ends are MNPT (Male National Pipe Thread)
  • All Lengths Come on Cardboard Reels (Wood Reels on Request for Upcharge)

Ordering Information - FREE SHIPPING

MODEL DIAMETER LENGTH PRICE
PI-HPBU-MM12-400 3/4" 400 FT $1,129.00add to cart
PI-HPBU-MM12-500 3/4" 500 FT $1,359.00add to cart
PI-HPBU-MM12-600 3/4" 600 FT $1,791.00add to cart
PI-HPBU-MM16-400 1" 400 FT $1,585.00add to cart
PI-HPBU-MM16-500 1" 500 FT $1,942.00add to cart
PI-HPBU-MM16-600 1" 600 FT $2,298.00add to cart
PI-LLBU-MM08-400 1/2" 400 FT $729.00add to cart
PI-LLBU-MM08-500 1/2" 500 FT $912.00add to cart
PI-LLBU-MM08-600 1/2" 600 FT $1,094.00add to cart
Sewer Jetter Hoses

Below are lateral line or drainage line jetting hoses in 2 different ID sizes rated in various pressures.

Features:
  • Rated 4000 PSI or 5000 PSI (Burst Pressure to 10,000 – 12,500 PSI)
  • Hose Color: Green, Red, or Black
  • Hose ID ranges between 1/2”-5/8” (depending on model)
  • Available in 400,500, and 600 ft Standard Lengths
  • Continuous service from -40 to150 °F
  • Ends are MNPT (Male National Pipe Thread)
  • All Lengths Come on Cardboard Reels (Wood Reels on Request for Upcharge)

Ordering Information - FREE SHIPPING

MODEL COLOR PSI DIAMETER LENGTH PRICE
PI-LLGR-MM08-400 Green 4000 1/2" 400 FT $924.00add to cart
PI-LLGR-MM08-500 Green 4000 1/2" 500 FT $1,155.00add to cart
PI-LLGR-MM08-600 Green 4000 1/2" 600 FT $1,334.00add to cart
PI-LLRD-MM08-400 Red 5000 1/2" 400 FT $1,313.00add to cart
PI-LLRD-MM08-500 Red 5000 1/2" 500 FT $1,580.00add to cart
PI-LLRD-MM08-600 Red 5000 1/2" 600 FT $1,896.00add to cart
PI-LHBK-MM08-400 Black 4000 1/2" 400 FT $1,242.00add to cart
PI-LHBK-MM08-500 Black 4000 1/2" 500 FT $1,495.00add to cart
PI-LHBK-MM08-600 Black 4000 1/2" 600 FT $1,794.00add to cart
PI-SHBK-MM08-400 Black 4000 1/2" 400 FT $1,183.00add to cart
PI-SHBK-MM08-500 Black 4000 1/2" 500 FT $1,424.00add to cart
PI-SHBK-MM08-600 Black 4000 1/2" 600 FT $1,709.00add to cart
PI-SHBK-MM10-400 Black 4000 5/8" 400 FT $1,259.00add to cart
PI-SHBK-MM10-500 Black 4000 5/8" 500 FT $1,593.00add to cart
PI-SHBK-MM10-600 Black 4000 5/8" 600 FT $1,818.00add to cart

Jetter Pulse Valve

 

Jetter Pulse Valves

Replaces valve cap to create pulsation action, to move nozzle in pipe cleaning applications. The listed models are designed for General Pump systems.

Please call toll free 866-858-4982 for pricing and availability if you have an AR, CAT, COMET or UDOR pump.

(Shipping charge of $8.95 will apply on these items if the total order is less than $69.00)

MODEL DESCRIPTION PRICE
100316 For EZ Pumps $92.50add to cart
8.712-249.0 For 47 Series Pumps $88.80add to cart
8.712-250.0 For TT Pumps $88.90add to cart

Sewer Jetter Foot Valves

Sewer Jetter Foot Valve

Operators of sewer and tube cleaning equipment need both hands free to feed or retract the hose in the sewer line. Foot operated valve allows hands-free control.

Features:
  • Max Pressure: 3000 PSI
  • Max Flow: Up to 12 GPM
  • Max Temperature: 300 °F
  • Inlet: 3/8"
  • Outlet: 1/4"
  • Brass body - Stainless Steel Valve
  • Steel Cover for safety

Ordering Information - FREE SHIPPING

MODEL Description PRICE
8.710-134.0 3000 PSI Max Foot Valve $127.15add to cart
Sewer Jetter Foot Valve
Features:
  • Max Pressure: 5000 PSI
  • Max Flow: Up to 12 GPM
  • Max Temperature: 300 °F
  • Inlet: 3/8"
  • outlet: 1/4"
  • Brass and Stainless steel valve
  • Heavy gauge steel construction for durability and stability

Ordering Information - FREE SHIPPING

MODEL Description PRICE
8.709-972.0 5000 PSI Max Foot Valve $260.55add to cart
Sewer Jetter Foot Valve
Features:
  • Max Pressure: 7250 PSI
  • Max Flow: Up to 21 GPM
  • Max Temperature: 210 °F
  • Inlet: 1/2" NPT-F
  • Outlet: 1/2" NPT-F
  • Aluminum body - Brass and Stainless steel valve

Ordering Information - FREE SHIPPING

MODEL Description PRICE
8.709-972.0 5000 PSI Max Foot Valve $260.55add to cart

See Also

Sludge Pumps

Sludge Pumps

Make your pressure washer into a sludge, slurry or water evacuation tool. Simply by attaching the quick-connect fitting on the sludge pump / muck scupper attachment to the end of your wand.

UHP Foot Valve

Ultra High Pressure Foot Valves

Add cleaning tools such as foot valve to smoother operation with your ultra high pressure water blaster. These foot valves are rated 11,600 up to 21,000 PSI or 800 bar to 1500 bar.

surface cleaner accessories

Sewer Jetting Nozzles

Laser, Corner and Rotary Nozzles are used in wide range of cleaning applications...

High Pressure Nozzles, Sewer Nozzle

High Pressure Nozzles

Excellent for pipe cleaning, sewer and drain cleaning.

Can this page be improved? Is the information complete and easy to understand? We are always looking to improve our website, so please feel free to give us your comments or suggestions. Thanks for helping us serve you better!

Note : If you would like us to reply, please include an E-mail or Phone Number.
Verification Code:
Please type the code shown in the image: