Stainless Steel Quick Connect without Gauge
This top tier stainless pressure gauge fitting with port is meant to be paired with the top-mount pressure gauges offered in several sizes of gauge between 5,000 PSI and 10,000 PSI. With 3/8" quick couplers on both ends, this tool can quickly be relocated anywhere in your pressurized line to measure baseline and performance pressure. Once installed, this device effectively measures running pressure and catches spikes that occur when your gun trigger is released or engaged.
A primary fixed location is most commonly found immediately after the pump or on an unloader port to measure 'Pressure at the Pump' and catch pressure spikes.
A secondary, temporary position is at the base of the spray gun for intermittent checking of pressure to ensure your nozzle does not need to be replaced. This will also catch pressure spikes and alert you of pressure changes over time as your nozzle enlarges due to wear.
- 5,000 - 10,000 PSI Range
- Inlet: 3/8" quick connect plug
- Outlet: 3/8" quick connect coupler
- Hole in top is ready to accept your own gauge
(Shipping charge of $8.95 will apply on these items if the total order is less than $69.00)
||Stainless Steel Quick Connect Fitting (No Gauge)