Electric Motor Steam Pressurewashers

Stainless Steel Versa Series Super Steamer

Features:

• 250 PSI at 2.5 GPM
• 8.75 gallon diesel tank
• 120 Voltage
• Stainless steal super steamer
• Wheel brake system
• 13" Premium heavy-duty tires for easy mobility and vibration dampening
• Stainless steel float tank
• NEMA 4X electrical enclosure with burner on/off rocker switch, thermostat control and hour meter, time delay-shut off
• Steerable pull handle
• Accessories (A) Heat-resistant spray gun (up to 320°F)
• Accessories (B) 48" Steel lance with insulated grip and 1/4" QC fitting
• Accessories (C) 3/8" x 50' Steel-braided Armor Hose
• Accessories (D) High quality QC nozzles 15°, 25°, 40°
• Dimensions: 31"L x 61"W x 40"H
• Weight: 574 lbs

MODEL	PSI	GPM	VOLTAGE / PHASE	PRICE
65078	250	2.5	120V / 1 Ph	$6,449.10

Electric Power Washers

Features:

• 2000PSI at 4.0 GPM
• 5 HP Electric Motor with Magnetic Starter
• Triplex Plunger General Pump
• 4 Pneumatic Tires
• Oil Fired Burner (No. 1 & No. 2 Diesel, Kerosene, or No. 1 Home Heating Oil)
• Downstream Detergent Injection
• Trigger Gun and 41" Dual Lance Wand
• Nozzles – 0º, 15º, 25º, 40º
• 50 FT of 3/8” Wire Braided Pressure Hose w/ swivel connector and bend restrictors
• 36 FT GFCI Power Cord on single phase units
• Split Stainless-Steel Outer Coil Wrap
• Schedule 80 Coil (1" Insulation Blanket, 5 year warranty)
• Steel Chassis with Textured Polyester Powder Coat
• Fuel Tank: 9 Gal capacity with integrated cap gauge and stainless steel dial indicator
• Belt Drive
• Auto Start / Stop available for $299.00 (Call to order 1-866-858-4982)
• Dimensions: 47.8"L x 33"W x 46"H
• Weight: 630 lbs
• Warranty information

Electric Steam Pressure Washers

Features:

• 3000 PSI at 3.5GPM
• 7.5 HP Electric Motor with Magnetic Starter
• Triplex Plunger General Pump
• 4 Pneumatic Tires
• Oil Fired Burner (No. 1 & No. 2 Diesel, Kerosene, or No. 1 Home Heating Oil)
• Downstream Detergent Injection
• Trigger Gun and 41" Dual Lance Wand
• Nozzles – 0º, 15º, 25º, 40º
• 50 FT of 3/8” Wire Braided Pressure Hose w/ swivel connector and bend restrictors
• 36 FT GFCI Power Cord on single phase units
• Split Stainless-Steel Outer Coil Wrap
• Schedule 80 Coil (1" Insulation Blanket, 5 year warranty)
• Steel Chassis with Textured Polyester Powder Coat
• Fuel Tank: 9 Gal capacity with integrated cap gauge and stainless steel dial indicator
• Belt Drive
• Auto Start / Stop available for $299.00 (Call to order 1-866-858-4982)
• Dimensions: 48"L x 33"W x 46"H
• Weight: 630 lbs
• Warranty information

Electric PressureWashers

Features:

• 3000 PSI at 4.0 or 4.8 GPM
• 10 HP Electric Motor with Magnetic Starter
• Triplex Plunger General Pump
• 4 Pneumatic Tires
• Oil Fired Burner (No. 1 & No. 2 Diesel, Kerosene, or No. 1 Home Heating Oil)
• Downstream Detergent Injection
• Trigger Gun and 41" Dual Lance Wand
• Nozzles – 0º, 15º, 25º, 40º
• 50 FT of 3/8” Wire Braided Pressure Hose w/swivel connector and bend restrictors
• 36 FT GFCI Power Cord on single phase units
• Split Stainless-Steel Outer Coil Wrap
• Schedule 80 Coil (1" Insulation Blanket, 5 year warranty)
• Steel Chassis with Textured Polyester Powder Coat
• Fuel Tank: 9 Gal capacity with integrated cap gauge and stainless steel dial indicator
• Belt Drive
• Auto Start / Stop included
• Dimensions: 48"L x 33"W x 46"H
• Weight: 630 lbs
• Warranty information

Electric Steam Power Washer

Features:

• 2000 PSI at 4.0 GPM
• 5.0 HP Baldor Electric Motor 208-230 or 460 V / 1 or 3 Phases (2 year warranty)
• Triplex Plunger Pump (5 year warranty)
• Liquid Propane or Natural Gas Fired Burner
• Upstream Chemical Injection with Metering Valve
• Trigger Gun and 41" Dual Lance Wand
• Nozzles – 0º, 15º, 25º, 40º
• 50 FT of 3/8” Wire Braided Pressure Hose w/swivel connector and bend restrictors
• Schedule 80 Coil
• Stainless Steel Control Box Cover
• Split Stainless-Steel Outer Coil Wrap
• Polyethylene Float Tank
• Steel Chassis with Powder Coat Paint
• Belt Drive
• Available Option: Hose Reel with Bracket (view)
• Dimensions: 41”L x 26”W x 52 ”H
• Shipping Dimensions: 58”L x 33”W x 56”H
• Weight : 600 lbs
• Warranty information

Kranzle Pressure Washers offer the ingenuity and quality you would expect from German design with a low price. The advantage of these units over others like them is that the steam capability is integrated within the unit and units can be used at temperatures as high 300° F. Another feature that sets these apart in the industry is the fact that they can run dry, can start dry, self priming, and can even accept water from tank, pond, or ocean. Pumps are unique industrial Crinkle design using ceramic coated plungers. This rock hard coating provides a smooth surface for long seal life. The steel, underneath, this coating, provides strength and allows the heat to be conducted in the oil bath where it is dissipated. The wobble plate is efficient, rugged, and easily maintained.

All units below are wet steam hot water pressure washers, meaning they have flow and pressure of a normal hot water pressure washer; however they are capable of a temperature rise of 120° F above ambient water (inlet water) temperature. These steam pressurewashers can achieve a maximum of 300° F. The temperature of water put out is extremely hot and should be used with safety in mind. Standard features on all units include multiple safety systems. Enclosed design is visually pleasing but servicing is easy within the unit. All pumps and parts are readily available.

Therm C Electric Hot Water Steam Power Washers

Features:

• 2,000-2600 PSI
• 2.9-3.5 Gallons per minute
• Kranzle AM industrial grade pump with 10 year manifold warranty
• Adjustable pressure unloader
• 220 v, 15 amps single phase TEFC electric motor
• Steel frame with cover capable of storing all accessories
• Schedule 80 heating coil
• Down draft fuel efficient 220 volt burner
• Adjustable temperature control
• Uses diesel fuel
• Inlet water filter

Accessories Included:

• Professional gun-jet lance
• 50' wire braided hose on hose reel
• High pressure chemical injection
• Gauge
• Safety coupler screw connections
• Fan spray nozzle

Special Features:

• Pump design gives multi-hour bypass and run-dry capability preventing accidental pump damage
• Auto on/off gun-jet control with 30 second time delay
• Safety shut-down after non-use

MODEL	PSI	GPM	VOLTAGE / PH / AMP	MOTOR	PRICE
ThermC11-130	2000	2.9	230V / 1 Ph / 15 Amp	3.0 HP Electric	$4,800.10
ThermC13-180	2600	3.4	230V / 3 Ph / 15 Amp	3.0 HP Electric	$4,907.20

Electric Hot Water Steam PressureWashers

Features:

• 2,400 - 2,500 PSI
• 3.3 - 5 Gallons per minute
• Kranzle AQ industrial grade pump with 10 year manifold warranty
• Adjustable pressure unloader
• 220-440 v, 15-25 amps single phase TEFC electric motor
• Steel frame with cover capable of storing all accessories
• Schedule 80 heating coil
• Down draft fuel efficient 220 volt burner
• Adjustable digital temperature control
• Uses diesel fuel
• Inlet water filter

Accessories Included:

• Professional gun-jet lance
• 65' wire braided hose on hose reel
• High pressure chemical injection
• Gauge
• Safety coupler screw connections
• Fan spray nozzle
• Industrial Dirt Killer turbo nozzle

Special Features:

• Pump design gives multi-hour bypass and run-dry capability preventing accidental pump damage
• Auto on/off gun-jet control with 30 second time delay
• Safety shut-down after non-use
• Precise digital temperature control
• Flame safety monitor
• Steam capable
• Built-in hose reel
• Requires 220 volt, 25 amp single phase circuit
• Weight: 484 lbs
• Dimensions: 32”L x 47”W x 41”H
• Warranty: 1 Year Engine Warranty, 10 Years on Pump Manifold, 1 Year on Remainder of Pump

MODEL	PSI	GPM	VOLTAGE / PH / AMP	MOTOR	PRICE
Therm2175	2500	3.3	230V / 1 Ph / 25 Amp	5.0 HP Electric	$8,016.00
Therm1165	2400	5.0	220V / 3 Ph / 25 Amp	7.5 HP Electric	$7,244.00
Therm1165-440V	2400	5.0	440V / 3 Ph / 15 Amp	7.5 HP Electric	$7,362.00