Got questions?
Feel free to get in touch
The Button Nose ("BN") nozzle is well suited for general drain cleaning applications. It's short body and smooth round nose make it ideal for tight turns in traps and elbows, reducing hang ups. We've increased the functionality over typical round nose sewer nozzles with the addition of a second grove which permits steeper thrust angles and more pulling power while maintaining a streamlined body. This unique design permits multiple angle combinations on one nozzle.
There is $8.95 charge for delivery under $75.00 Orders. Additional charges will be imposed by our couriers for delivery to remote area, a surcharge may be levied to cover carriage to these areas.
For direct-to-consumer products, the shipping fee may need to be estimated based on the delivery address. Please call for a shipping estimate.
Description: The Thruster has a 25 degree angle for maximum pulling power. Use in a plugged line situation or for runs greater than 150 ft.
Pattern: 1 forward jet (optional), 3 to 6 rear jets
Standard Pattern: 6 rear jets
Description: 35 degree Penetrating angle with super pulling power. Use in a plugged line situation or for runs between 100 to 150 ft.
Pattern: 1 forward jet (optional), 3 to 6 rear jets
Standard Pattern: 1 forward and 3 rear jets
Description: The Flusher has a 45 degree angle with good pulling power. Use for runs up to 100 ft. A good general purpose cleaning nozzle.
Pattern: 1 forward jet (optional), 6 to 12 rear jets
Description: 55 degree Sweeping angle, pulling similar power as Flusher mole, but offers wider angle for sweeping lines clean.
Pattern: 1 forward jet (optional), 6 to 12 rear jets
Description: 55 degree Flushing angle combined with a 90 degree side jet to assist nozzle through corners, etc.
Pattern: 1 forward jet (optional), 1 side jet @ 90 degrees & 3 to 6 rear jets
Description: A dual angle nozzle combining the forces of both thrust and flush for superior pulling and cleaning power.
Pattern: 1 forward jet, 2 rear jets at 45° and 2 rear jets @ 25°, or 3 rear jets at 45° and 3 rear jets @ 25°
