Got questions?
Feel free to get in touch
There is $8.95 charge for delivery under $75.00 Orders. Additional charges will be imposed by our couriers for delivery to remote area, a surcharge may be levied to cover carriage to these areas.
For direct-to-consumer products, the shipping fee may need to be estimated based on the delivery address. Please call for a shipping estimate.
Description: The Thruster has a 25 degree angle for maximum pulling power. Use in a plugged line situation or for runs greater than 150 ft.
Pattern: 1 forward jet (optional), 3 to 6 rear jets
Standard Pattern: 6 rear jets
Description: 35 degree Penetrating angle with super pulling power. Use in a plugged line situation or for runs between 100 to 150 ft.
Pattern: 1 forward jet (optional), 3 to 6 rear jets
Standard Pattern: 1 forward and 3 rear jets
Description: The Flusher has a 45 degree angle with good pulling power. Use for runs up to 100 ft. A good general purpose cleaning nozzle.
Pattern: 1 forward jet (optional), 6 to 12 rear jets
Description: 55 degree Sweeping angle, pulling similar power as Flusher mole, but offers wider angle for sweeping lines clean.
Pattern: 1 forward jet (optional), 6 to 12 rear jets
Description: 55 degree Flushing angle combined with a 90 degree side jet to assist nozzle through corners, etc.
Pattern: 1 forward jet (optional), 1 side jet @ 90 degrees & 3 to 6 rear jets
Description: A dual angle nozzle combining the forces of both thrust and flush for superior pulling and cleaning power.
Pattern: 1 forward jet, 2 rear jets at 45° and 2 rear jets @ 25°, or 3 rear jets at 45° and 3 rear jets @ 25°
