Categories

Air Compressors

Car Wash

Chemical Sprayers

Chemicals

Electric Converters

Fans

Fire Sprinkler Maintenance Systems

Floor Machines

Forklift Trucks

Generators

Hydrostatic Line Testers

Industrial Curtains

Parts Washers

Pressure Washers

Sewer Jetting

Soft Wash Systems

Specialty Pumps

Steam Generators

Water Blasters

Water Pumps

Water Recovery & Filtration

Winter Products

8 Easy Steps to Rebuilding Rotary Turbo Nozzle and Seat

Victor Hayes Popovics - The ExpertBy Victor Hayes Popovics

Power Equipment Expert
Ultimate Washer Inc.



These are about the easiest instructions you’ll ever have to follow. In 8 easy steps, we’re going to show you how to rebuild your rotary turbo nozzle and seat. All you’ll need is a vise to get started.


  1. Place turbo nozzle in a vise with outlet end pointing down.
    Do Not Remove Protective Cap



  2. Nozzle should be secured in vise between tapered brass edge and protective cap.


  3. Remove brass inlet with impact wrench or crescent wrench. Assure inlet water ports are clean and clear.


  4. Remove brass housing from vise and dump out old rotary turbo nozzle.

  5. Press out ceramic seat and seat shroud.

  6. Install new seat assembly (o-ring end nearest discharge) assuring the assembly is fully seated.

  7. Secure brass housing back in vise and place new rotary turbo nozzle in housing.

  8. Secure brass inlet back onto housing.

That’s about as easy as it gets, right? Remember to always operate machinery safely and follow all precautions. Happy cleaning everyone!


The publisher of these pages is in no way responsible for any damage caused to you, your pressure washer, anyone else, your property, or anyone else's property by trying to implement or by successfully implementing the above-mentioned performance and services.

Sources:


  1. Suttner Schematics
  2. Replacing Rotor Nozzle and Seat

Read Related Articles:

  • Rotary Nozzles
    Power washer rotary nozzles are an attachment which takes the fine, pin point area of a 0 Degree (Red) nozzle and expands it to a broader cone shape...

  • Testimonials Special Attachment: Rotary Nozzle
    This nice testimonial of pressure washer rotary nozzle sold by ultimatewasher.com

  1. Suttner Schematics
  2. Replacing Rotor Nozzle and Seat

Read Related Articles:

  • Rotary Nozzles
    Power washer rotary nozzles are an attachment which takes the fine, pin point area of a 0 Degree (Red) nozzle and expands it to a broader cone shape...

  • Testimonials Special Attachment: Rotary Nozzle
    This nice testimonial of pressure washer rotary nozzle sold by ultimatewasher.com

Phone: (866) 858-4982

Email: info@ultimatewasher.com

Business Hours: M-F: 9am - 5:30pm EST

Address: 6701 Garden Rd Unit #3, Riviera Beach, FL 33404