Propulse Uberflex Kink Resistant Pressure Washer Hose, 3100 PSI, 1/4 in, 25 & 50 ft

Residential Replacement Pressure Washer Hose

If your hose is stiff, tangled, or too short, the Propulse Uberflex is a straightforward replacement. It is a 1/4 inch M22 hose rated to 3100 PSI with a fiber-braid reinforcement and a textured thermoplastic cover. The cover resists abrasion, and the hose resists permanent kinking, so it is easier to drag, coil, and store than a standard PVC hose.

Choose Your Length

The 25 ft hose suits cars, driveways, and small decks where the washer can sit close to the work. The 50 ft hose lets you leave the machine in one spot and reach the whole car, patio, or side of the house without moving it.

Check Your Fittings First

Both ends are M22 female twist connects sized for 14mm. This fits many gas pressure washers, including Generac and Excell units. Some electric washers, such as Sun Joe, use M22-15mm fittings, and this hose will not connect to those without an adapter. If you are not sure which size you have, check the pump outlet and gun inlet, or send us your model number and we will confirm.

Details

Maximum working pressure is 3100 PSI. Inner diameter is 1/4 inch. For cold water use only. Not for hot water or steam. Made in the USA.

There is $8.95 charge for delivery under $75.00 Orders. Additional charges will be imposed by our couriers for delivery to remote area, a surcharge may be levied to cover carriage to these areas.

For direct-to-consumer products, the shipping fee may need to be estimated based on the delivery address. Please call for a shipping estimate.