Air Compressors
Car Wash
Chemical Sprayers
Chemicals
Electric Converters
Fans
Fire Sprinkler Maintenance Systems
Floor Machines
Forklift Trucks
Generators
Hydrostatic Line Testers
Industrial Curtains
Parts Washers
Pressure Washers
Sewer Jetting
Soft Wash Systems
Specialty Pumps
Steam Generators
Water Blasters
Water Pumps
Water Recovery & Filtration
Winter Products
Sewer and Drain Cleaning Equipment
- Watch for the hose mark to arrive at the drain pipe entrance.
- Redure pressure gradually until pressure gauge reads zero.
- Stop the motor / engine.
Motor stopping procedure for electric models:
A. Move switch to "off" position.
B. Disconnect Cort from electrical source.
Motor stopping procedure for propane powered models:
A. Move the throttle lever fully to the "right".
B. Turn the engine switch to the "off" position.
C. Close the propane tank valve.Motor stopping procedure for gasoline powered models:
A. Move the throttle lever fully to the "right".
B. Turn the engine switch to the "off" position.
C. Turn the fuel valve to the "off" position.
Warning: A left open fuel valve can flood and gum-up the carburetor. The result is a hard starting and / or rough idling engine. - Continue to run water through pump and jetter hose for another minute.
- Close water supply and remove garden hose from faucet.
- Close water inlet valve and disconnect garden hose from jetter.
- Remove remaining jetter hose from drain pipe.
- Store jetter hose properly.
- Remove jetter nozzle as required.
- Open intake, discharge or pressure relief valve to drain pump.
Warning: Never permit pump to run dry and never spray acids or abrasive fluids!
Drain Cleaning Equipment
Sewer Jetter Hoses
Sewer Jetter Nozzles
Sewer Jetter Cutting Heads
Sewer Jetter Other Accessories
Phone: (866) 858-4982
Email: info@ultimatewasher.com
Business Hours: M-F: 9am - 5:30pm EST
Address: 6701 Garden Rd Unit #3, Riviera Beach, FL 33404