Electric Motor - Natural Gas or Propane Fired Burners

 

Each model is equipped with a quick clean burner systems with a convenient slide out burner for easy maintenance. All models equipped with auto start stop function for longer pump life.

Any custom made machine can be built and would require a special quote. Call us if you have special needs!

CLICK HERE TO REQUEST A QUOTE

Order Online or Call Toll Free (866) 858-4982

Industrial Hot Water Electric - Natural Gas Fired Burners

Industrial Hot Water Electric - Natural Gas Fired
Hot Water Electric Natural Gas Fired Burner
CLICK TO ENLARGE

Industrial Hot Water Electric - Natural Gas Fired Burners

Features:

  • 2,000 - 8,000 PSI
  • 4 - 12 GPM
  • 5 - 50 HP
  • Belt Drive
  • 390,000 - 940,000 BTU
  • 220 - 460 Voltage
  • 1 - 3 Phase
  • General Pump - Italian-made industrial heavy-duty triplex plunger pump with oil bath crankcases, stainless steel valves, and brass manifolds. General Pumps are the most widely used pumps in the world.
  • Belt Drive - Large diameter pulleys are used to reduce belt wear.
  • Flange and Coupling Drive - Available for those who do not prefer belt drives.
  • Heating Coil - Elliptically wound cold process of stretched reduced full body normalized ASTM A53/APIPSL schedule 80 or 160 pipe. The coil is structurally braced to minimize pipe wear and vibration. It is sealed with a ceramic blanket in a stainless steel housing.
  • Burners - Quality North American-made natural gas or propane fired burners and controls with adjustable thermostats are used for efficiency, dependability, and serviceability. Units are equipped with quick kleen burner apparatuses. Burners jets have 6 oxygen orifice inlets to ensure maximum burn and minimize CO results.
  • Frame - Rugged 11 gauge and 1/4” bent one-piece plate steel frame is fully welded with a powder coat finish. Frames are equipped with 11 gauge steel shrouds with integrated belt guards for maximum serviceability.
  • Also Included - Gun and wand assembly, 50 feet of high-pressure hose, high-pressure chemical injection, 5 nozzles, and poly float tanks on 4 - 12 GPM units.

Ordering Information - FREE SHIPPING

MODEL PSI GPM DRIVE BTU HP VOLTAGE PRICE
11-PWEZ12 2000 4.0 Belt 390,000 5 220V-1PH $5,285.70add to cart
11-PWEZ13 2000 4.0 Belt 390,000 5 460V-3PH $5,285.70add to cart
11-PWEZ14 3000 5.0 Belt 390,000 10 220V-1PH $6,048.00add to cart
11-PWEZ15 3000 5.0 Belt 390,000 10 460V-3PH $6,048.00add to cart
11-PWEZ16 3000 8.0 Belt 720,000 15 460V-3PH $9,027.90add to cart
11-PWEZ17 3600 8.0 Belt 720,000 20 460V-3PH $9,027.90add to cart
11-PWEZ18 2500 12.0 Belt 940,000 20 460V-3PH $10,136.70add to cart
11-PWEZ19 5000 5.0 Belt 510,000 20 460V-3PH $10,413.90add to cart
11-PWEZ20 6000 4.0 Belt 390,000 20 460V-3PH $12,007.80add to cart
11-PWEZ21 7000 4.0 Belt 390,000 20 460V-3PH $12,978.00add to cart
11-PWEZ22 8000 8.0 Belt 720,000 50 460V-3PH $34,045.20add to cart

Industrial Hot Water Electric - Propane Fired Burners

Industrial Hot Water Electric - Propane Fired
Hot Water Electric Propane Fired Burner
CLICK TO ENLARGE

Industrial Hot Water Electric - Propane Fired Burners

Features:

  • 2,000 - 8,000 PSI
  • 4 - 12 GPM
  • 5 - 50 HP
  • Belt Drive
  • 390,000 - 940,000 BTU
  • 220 - 460 Voltage
  • 1 - 3 Phase
  • General Pump - Italian-made industrial heavy-duty triplex plunger pump with oil bath crankcases, stainless steel valves, and brass manifolds. General Pumps are the most widely used pumps in the world.
  • Belt Drive - Large diameter pulleys are used to reduce belt wear.
  • Flange and Coupling Drive - Available for those who do not prefer belt drives.
  • Heating Coil - Elliptically wound cold process of stretched reduced full body normalized ASTM A53/APIPSL schedule 80 or 160 pipe. The coil is structurally braced to minimize pipe wear and vibration. It is sealed with a ceramic blanket in a stainless steel housing.
  • Burners - Quality North American-made natural gas or propane fired burners and controls with adjustable thermostats are used for efficiency, dependability, and serviceability. Units are equipped with quick kleen burner apparatuses. Burners jets have 6 oxygen orifice inlets to ensure maximum burn and minimize CO results.
  • Frame - Rugged 11 gauge and 1/4” bent one-piece plate steel frame is fully welded with a powder coat finish. Frames are equipped with 11 gauge steel shrouds with integrated belt guards for maximum serviceability.
  • Also Included - Gun and wand assembly, 50 feet of high-pressure hose, high-pressure chemical injection, 5 nozzles, and poly float tanks on 4 - 12 GPM units.

Ordering Information - FREE SHIPPING

MODEL PSI GPM DRIVE BTU HP VOLTAGE PRICE
11-PWEZ23 2000 4.0 Belt 390,000 5 220V-1PH $5,285.70add to cart
11-PWEZ24 2000 4.0 Belt 390,000 5 460V-3PH $5,285.70add to cart
11-PWEZ25 3000 5.0 Belt 390,000 10 220V-1PH $6,048.00add to cart
11-PWEZ26 3000 5.0 Belt 390,000 10 460V-3PH $6,048.00add to cart
11-PWEZ27 3000 8.0 Belt 720,000 15 460V-3PH $9,027.90add to cart
11-PWEZ28 3600 8.0 Belt 720,000 20 460V-3PH $9,027.90add to cart
11-PWEZ29 2500 12.0 Belt 940,000 20 460V-3PH $10,136.70add to cart
11-PWEZ30 5000 5.0 Belt 510,000 20 460V-3PH $10,413.90add to cart
11-PWEZ31 6000 4.0 Belt 390,000 20 460V-3PH $12,007.80add to cart
11-PWEZ32 7000 4.0 Belt 390,000 20 460V-3PH $12,978.00add to cart
11-PWEZ33 8000 8.0 Belt 720,000 50 460V-3PH $34,045.20add to cart

Hot Water Gasoline Motor Power Washer

Failure to maintain heat exchanger coil may result in a system explosion which may cause serious injury or death.

Heat Exchanger Coil

Hard water conditions may eventually cause clogging in the heat exchanger coil if left unattended. Scale deposits will compromise the heating efficiency and produce an unsafe condition over time. It may be necessary to de-scale coil.

Scale buildup from certain detergents may eventually clog up the heat exchanger coil causing an unsafe condition. Use recommended detergents for better cleaning efficiency.

Black carbon deposits that collect on the outside wall of the heat exchanger coil may be a result of using a poor grade of fuel or improper burner operation. Heating fuel should be void of water and sediments to eliminate the possibility of soothing and compromising the efficiency of the coil.

Coil De-scaling

We recommend that you call your local distributor to have the unit de-scaled.

Storage and Winterizing

Storage: Protect machine from freezing temperatures by storing in heated area.

Winterizing the float tank machines: Pour antifreeze into float tank and remove water nozzle from end of wand and carefully insert wand into opening of float tank. Start machine and run until anti-freeze water mixture has circulated throughout the machine returning back to the float tank.

Direct Drive Machines: To protect the machine from freezing temperatures while storing or transporting, connect short length of garden hose (approximately 3ft.) to water inlet connection on machine. Remove the pressure nozzle from the wand and insert the short garden hose end into a container of antifreeze. Place the wand into the antifreeze container and start engine running machine until antifreeze appears from the end of the wand. Turn engine "OFF" and replace pressure nozzle. Coil up hose and move machine to storage area.

See Also

Pressure Washer Burner

Pressure Washer Burners

Large selection of pressure washer burners that produces hot water for your machine. Powdercoated frames, stainless steel coil wrap, adjustable thermostat, forced air burners

Hot Pressure Washers

Electric motor - natural gas or liquid propane fired burners

BV Series- 2000PSI-3000PSI The BV gas-fired hot water pressure washers provide high performance with modular design. These machines are ideal for industrial and commercial cleaning applications. They are available in either NG or LP configuration to allow you to accommodate your individual needs.

diesel pressure washers

Diesel Engine - Diesel Fired Burners

Need a diesel powered hot water pressure washer? These series of portable or stationary units will match all of your need. Assembled and tested in the USA.

water saving system

Need a Water Containment System?

The Vacu-Boom system is engineered to be used in a wide variety of industrial and commercial applications where chemicals and fluid waste must be contained and/or captured and removed from the site.

Watch a Video

Pressure Washer Gun and Wand Assembly

Comes in different sizes and it is lightweight, can withstand the temperature up to 300 degrees.