Categories

Air Compressors

Car Wash

Chemical Sprayers

Chemicals

Electric Converters

Fans

Fire Sprinkler Maintenance Systems

Floor Machines

Forklift Trucks

Generators

Hydrostatic Line Testers

Industrial Curtains

Parts Washers

Pressure Washers

Sewer Jetting

Soft Wash Systems

Specialty Pumps

Steam Generators

Water Blasters

Water Pumps

Water Recovery & Filtration

Winter Products

Questions and Resolutions for Carwash Vacuums & Detailing Stations

The Pressure hose doesn't fit on the vacuum?

Potential resolutions:

  • Hold and start the groove in the hose on the notch in the hold, the hose is threaded on
  • Turn the hose counter clockwise, it has a reverse thread
  • Turn hose until it stops, about 2 inches

Why is there no suction from the vacuum?


Potential resolutions:

  • Open, clean out the door, and verify plugs are plugged into internal mounting system
  • Check if motors are turning
  • Check if vacuum hose is hooked up properly
  • Check hose for holes or splits
  • Check door and motor gaskets

How do I change the Digital Display Readout?


Potential resolutions:

  • Purchasing a remote control with unit
  • Programming can be done from the Manufacturer prior to shipment
  • Use manual to assist in reprogramming

Why is there nothing coming out of my scent / mobile detailing machine?


Potential resolutions:

  • Start machine and set switch for one of the scents
  • Hold your finger over the tip of the gun. Push the gun button and hold it for 20 seconds to 1 minute
  • Look for bubbles in the scent bottle
  • After 30 seconds or when bubbles are seen in the scent bottle, let go of the tip and continue to hold the button
  • Hold until product comes out

Why is the machine goes on and off or won't turn on?


Potential resolutions:

  • Check coin mechanical wires to micro switch
  • Make sure they are on "com" and "n.o." not "n.c."
  • Check the timer and make sure it is set
  • If machine won't go on at all, check the power source

How do I set the timer?


Potential resolutions:

  • # of min = amount of time

Which is better, a 2 motor or 3 motor? 3 motor versus 2 motor?

Potential resolutions:

  • 3 motor has more suction = better cleaning
  • If 1 motor fails, 2 motors still available
  • 3 motors work better in high elevation
  • 3 motors pull 24 amps requiring 30 amp svc
  • 2 motors pull 16 amps requiring 20 amp svc

Machine keeps getting broken into, what security options are available?


Potential resolutions:

  • Service door security cover
  • Security kit for service door
  • Coin box cover
  • Lock bar and locks

How can I easily attract more attention to my equipment?


Potential resolutions:

  • Match hoses and domes
  • Use new decal kits
  • Polish units
  • Islands and Canopies

What type of maintenance should I do?


  • Shake out at least once a week
  • Rinse with a low pressure hose or put it in washing machine
  • Air dry filters
  • Do not machine dry bags
  • Make sure to have a tight seal to prevent motor damage
  • Change filter bags monthly (or as needed)

  • Shake out at least once a week
  • Rinse with a low pressure hose or put it in washing machine
  • Air dry filters
  • Do not machine dry bags
  • Make sure to have a tight seal to prevent motor damage
  • Change filter bags monthly (or as needed)

Phone: (866) 858-4982

Email: info@ultimatewasher.com

Business Hours: M-F: 9am - 5:30pm EST

Address: 6701 Garden Rd Unit #3, Riviera Beach, FL 33404