Air Compressors
Car Wash
Chemical Sprayers
Chemicals
Electric Converters
Fans
Fire Sprinkler Maintenance Systems
Floor Machines
Forklift Trucks
Generators
Hydrostatic Line Testers
Industrial Curtains
Parts Washers
Pressure Washers
Sewer Jetting
Soft Wash Systems
Specialty Pumps
Steam Generators
Water Blasters
Water Pumps
Water Recovery & Filtration
Winter Products
4000 PSI Industrial Sludge Pump
Product Number: 8.711-112.0
ST-35 Pit Boss Sludge Sucker
- Min/max water flow: 36 PM - 86 PM
- Min/max pressure: 1000 PSI - 4000 PSI
- Uses standard 1/4" MPT nozzle
- Easy to change for different plumbing system flows and pressures.
- 4.5 orifice MEG Spray Nozzle
- Vacuums up liquid slurries at a ratio of about 1:11 (Example: using 4 GPM will produce an output of 44 GPM
- High pressure creates more lift (Example: 1000 psi will lift water 10 feet while the max. 4000 psi will lift it 30 feet.)
- Cleans up solutions/slurries without damage to your pressure pump.
Description
Sludge Sucker uses a high pressure water stream (1000-4000 PSI) to suck the sludge off the bottom of pits or tanks and eject it through a 1-1/2" (15 FT. long) hose to a disposal tank.
The Sludge Pump is a great tool for cleaning up water and slurries. Simply attach the pressure line from a portable power washer or car wash bay. The water flowing through the high pressure nozzle creates a powerful venturi suction that vacuums up slurry solutions. Debris as large as 3/4" will pass through the casting and out the discharge hose.
The base unit attaches to the end of a pressure washer lance with a 1/4 inch quick coupler for extension to the bottom of the pit. Uses a 0 tip for suction/power ejection. Base unit measures 6" long and 4" wide.
Specifications
|
|
Phone: (866) 858-4982
Email: info@ultimatewasher.com
Business Hours: M-F: 9am - 5:30pm EST
Address: 6701 Garden Rd Unit #3, Riviera Beach, FL 33404