Features

• CSA approved / fully automatic 
• Environmentally friendly / no exhaust fumes or open flame 
• 2 year heater coil warranty / 3 year heater element warranty
• Belt-driven, oil-bath plunger pump 
• Auto start / stop circuit controlled by trigger gun activation 
• Instant hot pressurized water / no warm up time required 
• Large 80 gallon heat exchanger tanks allow for continuous recovery to maintain optimum performance  on units rated less than 8 GPM (8 GPM models use large capacity tank at 140 gallons).
• No hard water scale build up or heater element to burn out as no direct immersion of elements allowed into water being pumped 
• Transfer fluid in heat exchanger treated to prevent corrosion or galvanic action
• Thermo blanket lined tank provides almost 100 % energy input / output efficiency (all power is used to heat water
• Thermostatically controlled heat exchanger with low water shut off 
• Downstream chemical injection (8gpm or larger models include upstream chemical injection)
• Cold water through pump for long life 
• Automatic high temperature shut down (thermo probe) for pump protection 
• Ideal for centralised systems with multi station outlets 
• Available with 24, 48, 72 & 99 kW input and working pressures of  up to 4000 psi 
• Complete with 50 ft. steel braid pressure hose, trigger gun, variable pressure wand and hardened stainless steel nozzle (8 gpm or larger models include 2 sets)
• Multi-gun systems for high capacity cleaning

• Ease of use - trigger gun controlled start/stop system with solid state time delay shutdown
• Instant hot water - heat exchanger is thermally insulated allowing for almost 100% energy input/output and continuous, efficient operation
• Large 80 gallon heater storage tanks - allows for continuous heat recovery even when the gun is triggered off (depending on model)
• No open flame - can be installed in virtually any location
• Inherent pump protection - automatic high temperature shut down (thermo-probe) on pump bypass
• System weight: dry - 600 lbs. / operating - 1185 lbs. The PCA cart is designed to allow one operator to push/pull complete washing system on a smooth surface.
• Frame mounted on casters available for $550.00

• Low-rpm, belt-driven, oil-bath plunger pump - longer pump life when compared to direct drive systems
• Flow switch activated - not affected by small system leaks (i.e. trigger gun)
• #316 Stainless steel heat exchanger coil - designed for continuous duty use
• No direct immersion of heating elements - no scale buildup or element burnout