General Pressure Washer Pump

Home | Pressure Washer Selection | How To use Washer | Tips | Customer Service

HOME > Wet-Dry Vacuum Cleaners > Replacement Small Honda Engines > Hydraulic Centrifugal Pumps > Power Washer Safety Tips > General Pressure Washer Pump

AR
Pumps

Browse our large variety of industrial rated GENERAL Pumps for pressure washers gas engine or electric motor. With over 3.5 million high pressure plunger pumps in service globally, they are known for design ingenuity, outstanding material quality, and superior construction. Whether it’s a general purpose model, a water jetting type, or a stainless steel version built specifically to thrive in the harshest of chemical environments, every General pressure washer pump is tested at the factory before it’s approved for shipment.

Read more about General Pumps. Also available in Video DVD format on how to properly service or repair General Pumps.

General Pumps

TP Series - Direct Drive

Triplex Plunger pumps provide medium volume (3 GPM) at pressures up to 2500 PSI. All of the Triplex models feature standard brass manifold; stainless steel and aluminum are optional. Ceramic plungers are standard. Don't forget to get some extra pump oil.

Max Inlet Pressure: 80 PSI
Max Fluid Temperature: 165° F
Inlet Port Thread: 3/8”-19 BSP-F
Discharge Port Thread: 1/4”-19 BSP-F
Shaft Diameter: 19mm
Pump Dimensions: 7.0” x 7.2” x 5.5”
Max. Inlet Vacuum: 3 ft. water (2.6 in. Hg)
Crankcase Oil Capacity: 11.2oz
Direct Drive

Ordering Information - FREE Shipping

SKU#	MODEL	GPM	PSI	RPM	HP	BORE	STROKE	PRICE
BE-85-139-020B	TP2530J34UIL	3.0	2500	3400	6.5 HP Gas	15mm	7.2mm	$333.40
PP-TP2530J34	TP2530J34	2.88	2500	3400	9 HP Gas	15mm	7.2mm	$263.50
PP-TP2526J34UFIL	TP2526J34UFIL	2.6	2500	3400	9 HP Gas	15mm	6.6mm	$333.40

Download Specs and Diagram (TP2530J34UIL)

TT Series - Direct Drive

The TT series triplex plunger pumps are perfect for all general cleaning applications. These pumps come flanged for direct couple to gasoline engines or electric motors. These pumps feature a hallow shaft and are constructed with a life time warranty forged brass manifold.

Max Inlet Pressure: 80 PSI
Max Fluid Temperature: 165° F
Inlet Port Thread: 3/8”-19 BSP-F
Discharge Port Thread: 1/4”-19 BSP-F
Shaft Diameter: 19mm
Pump Dimensions: 7.2” x 7.2” x 5.5”
Max. Inlet Vacuum: 3 ft. water (2.6 in. Hg)
Crankcase Oil Capacity: 11.2oz
Direct Drive

Ordering Information - FREE Shipping

SKU#	MODEL	GPM	PSI	RPM	HP	BORE	STROKE	PRICE
PP-TT9061EBF	TT9061EBF	2.11	1500	3400	2 HP Electric	15mm	5mm	$263.50
PP-TT9061EBFL	TT9061EBFL	2.11	1500	3400	2 HP Electric	15mm	5mm	$263.50
PP-TT9071EBFL	TT9071EBFL	2.8	1500	3400	3 HP Electric	15mm	6.6mm	$263.50
PP-TT2035GBF	TT2035GBF	3.5	2000	3400	9 HP Gas	15mm	8mm	$392.35

TX Series - Belt or Gear Drive

The TX series triplex plunger pumps come standard with solid shaft for belt or gear driven applications and has long life low and high-pressure seals, oversized bearings and sight glass. The TX series pump is equipped with a life time warranty forged brass manifold.

Max Inlet Pressure: 125 PSI
Max Fluid Temperature: 165° F
Inlet Port Thread: 1/2”-14 BSP-F
Discharge Port Thread: 3/8”-19 BSP-F
Shaft Diameter: 24mm
Pump Dimensions: 8.4” x 8.3” x 4.8”
Max. Inlet Vacuum: 3 ft. water (2.6 in. Hg) Flooded
Crankcase Oil Capacity: 14.0 oz
Belt or Gear Drive

Ordering Information - FREE Shipping

SKU#	MODEL	GPM	PSI	RPM	HP	BORE	STROKE	PRICE
PP-TX1508S34	TX1508S34	3	3000	3400	6 HP Electric	15mm	8mm	$361.85

TX Series - Direct Drive

The TX series triplex plunger pumps come flanged for direct couple to gasoline engines. These pumps feature a 1” hallow shaft, long life low and high-pressure seals, oversized bearings, and dual sight glasses. The TX series pump line has large, lightweight connecting rods and are constructed with a life time warranty forged brass manifold.

Max Inlet Pressure: 125 PSI
Max Fluid Temperature: 165° F
Inlet Port Thread: 1/2”-14 BSP-F
Discharge Port Thread: 3/8”-19 BSP-F
Shaft Diameter: 25.4mm
Pump Dimensions: 8.4” x 8.3” x 4.8”
Crankcase Oil Capacity: 14 oz
Direct Drive

Ordering Information - FREE Shipping

SKU#	MODEL	GPM	PSI	RPM	HP	BORE	STROKE	PRICE
PP-TX1510G8UIA*	TX1510G8UIA	4.0	3000	3400	13 HP Gas	15mm	10mm	$322.30
PP-TX1506G8	TX1506G8	2.6	3000	3400	9 HP Gas	15mm	6.5mm	$329.55
PP-TX1508G8	TX1508G8	3.0	3000	3400	9 HP Gas	15mm	8mm	$329.55
BE-85-139-002B	TX1510G8	4.0	3000	3400	11 HP Gas	15mm	10mm	$531.10

* TX1510G8UIA has a built in head-unloader and built in chemical injector.

EZ Series - Direct Drive

The EZ series triplex plunger pumps come flanged for direct couple up to 16 HP gasoline engines or electric motors. These pumps come standard with hollow shaft and a life time warranty forged brass manifold.

Max Inlet Pressure: 125 PSI
Max Fluid Temperature: 165° F
Inlet Port Thread: 1/2”-14 BSP-F
Discharge Port Thread: 3/8”-19 BSP-F
Shaft Diameter: 25.4mm Gas Engines - 28.5mm Electric Motors
Pump Dimensions: 8.8” x 9.7” x 6.5”
Max. Inlet Vacuum: 3 ft. water (2.6 in. Hg)
Crankcase Oil Capacity: 14 oz
Direct Drive

Ordering Information - FREE Shipping

SKU#	MODEL	GPM	PSI	RPM	HP	BORE	STROKE	PRICE
PP-EZ2536E	EZ2536E	3.6	2500	1750	6 HP Electric	18mm	11mm	$436.00
PP-EZ2542E	EZ2542E	4.2	2500	1750	7.5 HP Electric	18mm	13mm	$436.00
PP-EZ3045G	EZ3045G	4.6	3000	3400	16 HP Gas	15mm	11mm	$361.85
BE-85-139-021B	EZ4040G	4.0	4000	3400	16 HP Gas	13mm	13mm	$433.80
PP-EZ4035G34	EZ4035G34	3.5	4000	3400	16 HP Gas	15mm	6.5mm	$357.75

Download Specs and Diagram (EZ4040G)

EZ Series - Belt or Gear Drive

The EZ series triplex plunger pumps come standard with solid shaft for belt or gear driven. The EZ series pump is equipped with a life time warranty forged brass manifold. Flex coupling and belt housing available for direct drive.

Max Inlet Pressure: 125 PSI
Max Fluid Temperature: 165° F
Inlet Port Thread: 1/2”-14 BSP-F
Discharge Port Thread: 3/8”-19 BSP-F
Shaft Diameter: 24mm
Pump Dimensions: 8.6” x 8.7” x 5.5”
Max. Inlet Vacuum: 3 ft. water (2.6 in. Hg)
Crankcase Oil Capacity: 14.0 oz
Belt or Gear Drive

Ordering Information - FREE Shipping

SKU#	MODEL	GPM	PSI	RPM	HP	BORE	STROKE	PRICE
PP-EZ2536S	EZ2536S	3	3000	3400	6 HP Electric	15mm	8mm	$402.25
PP-EZ3042S	EZ3042S	4.2	2500	1750	7.5 HP Electric	18mm	13mm	$406.05

General Pressure Washer Pump

TS Series - Gas Engine Direct Drive

Forged brass manifold
Solid ceramic plungers with continuously lubricated packings
Large-capacity, die-cast, anodized aluminum oil-bath crankcase

Ordering Information - FREE Shipping

SKU #	MODEL	PSI	GPM	HP	PRICE
BE-85-139-005B	TS1511	3000	4.0	11-13HP Gasoline	$572.70
BE-85-139-026B	TS2021	3500	5.6	20 HP Gasoline	$584.30

Download Specs and Diagram (TS1511)

Download Specs and Diagram (TS2021)

T Series - Belt or Gear Drive

The T series triplex plunger pumps come standard with solid shaft for belt or gear driven. These pumps are designed with powerful tapered roller bearings and oversized connecting rods to assure maximum life. Equipped with a lifetime warranty forged brass manifold.

Max Inlet Pressure: 125 PSI
Max Fluid Temperature: 165° F
Inlet Port Thread: 1/2”-14 BSP-F
Discharge Port Thread: 3/8”-19 BSP-F
Shaft Diameter: 24mm
Pump Dimensions: 12.6” x 9.2” x 6.9”
Max. Inlet Vacuum: 9 ft. water (7.9 in. Hg)
Crankcase Oil Capacity: 40.6 oz
Belt or Gear Drive

Ordering Information - FREE Shipping

SKU#	MODEL	GPM	PSI	RPM	HP	BORE	STROKE	PRICE
PP-TS1021	TS1021	4.5	3000	1125	10 HP Gas	20mm	16mm	$476.20
PP-T9281*	T9281	4	4000	1750	11 HP Electric	16mm	16mm	$802.00
PP-TS4040	TS4040	4	4000	1450	15 HP Gas	20mm	12mm	$490.65
PP-TS2021B	TS2021B	5.6	3500	1450	15 HP Gas	20mm	16mm	$489.05
PP-TS4040	TS4040	4	4000	1450	16 HP Electric	20mm	12mm	$490.65
PP-TS2021B	TS2021B	5.6	3500	1450	18 HP Electric	20mm	16mm	$489.05

* Nickel-plated Forged brass manifold

T Series - 1" Gear Box Belt or Gear Drive

The T series triplex plunger pumps comes with 1” Gear Box for J609B engine. These pumps are designed with powerful tapered roller bearings and oversized connecting rods to assure maximum life. Equipped with a lifetime warranty forged brass manifold.

Max Inlet Pressure: 125 PSI
Max Fluid Temperature: 165° F
Inlet Port Thread: 1/2”-14 BSP-F
Discharge Port Thread: 3/8”-19 BSP-F
Shaft Diameter: 25.4mm
Pump Dimensions: 12.2” x 9.2” x 10.5”
Max. Inlet Vacuum: 9 ft. water (7.9 in. Hg)
Crankcase Oil Capacity: 40.6 oz

Ordering Information - FREE Shipping

SKU#	MODEL	GPM	PSI	RPM	HP	BORE	STROKE	PRICE
PP-TS1511UR	TS1511UR	4	3500	3400	13 HP Gas	20mm	12mm	$739.35
PP-TS2021BUR	TS2021BUR	5.5	3500	3400	18 HP Gas	20mm	16mm	$756.75
PP-TS2021UR	TS2021UR	5.5	3500	3400	18 HP Gas	20mm	16mm	$876.90
BE-85-139-018B	T5050	5.0	5000	1845	24 HP Gas	16mm	19mm	$1,233.60

Download Specs and Diagram (T5050)

66 Series - Belt or Gear Drive

The 66 series triplex plunger pumps have an innovative new seal design to increase the life of the seal. These pumps are designed with new and improved thermal shock resistant plunger and a new valve cap to improve the pumps hydrostatic performance. The 66 series pump is equipped with a lifetime warranty forged brass manifold.

Max Inlet Pressure: 125 PSI
Max Fluid Temperature: 165° F
Inlet Port Thread: 3/4”-14 BSP-F
Discharge Port Thread: 3/8”-19 BSP-F
Shaft Diameter: .945 in/24mm
Pump Dimensions: 13.27” x 9.6” x 6.23”
Max. Inlet Vacuum: 9 ft. water (7.9 in. Hg)
Crankcase Oil Capacity: 31.0 oz
Belt or Gear Drive

Ordering Information - FREE Shipping

SKU#	MODEL	GPM	PSI	RPM	HP	BORE	STROKE	PRICE
PP-TSF2021	TSF2021	7	3600	1450	24 HP Gas	20mm	21mm	$752.90
PP-TSF2219	TSF2219	7.7	3000	1450	24 HP Gas	22mm	19mm	$752.90
PP-TSF2221	TSF2221	8.5	3000	1450	24 HP Gas	22mm	21mm	$752.90
PP-TSF2421	TSF2421	12	2500	1750	27 HP Gas	24mm	21mm	$841.50

66 Series - High Pressure Belt or Gear Drive

The 66 series High-Pressure triplex plunger pumps have an innovative new seal design to increase the life of the seal. These pumps are designed with new and improved thermal shock resistant plunger and a new valve cap to improve the pumps hydrostatic performance. The 66 series pump is equipped with a lifetime warranty forged brass manifold.

Max Inlet Pressure: 125 PSI
Max Fluid Temperature: 165° F
Inlet Port Thread: 1/2”-14 BSP-F
Discharge Port Thread: 3/8”-19 BSP-F
Shaft Diameter: .945 in/24mm
Pump Dimensions: 13.84” x 9.8” x 7.7”
Min. Inlet Pressure: 30 PSI
Crankcase Oil Capacity: 31.0 oz
Belt or Gear Drive

Ordering Information - FREE Shipping

SKU#	MODEL	GPM	PSI	RPM	HP	BORE	STROKE	PRICE
PP-TSP1619	TSP1619	3.6	7250	1450	24 HP Gas	16mm	21mm	$896.20
PP-TSP1621	TSP1621	4.3	5800	1450	24 HP Gas	16mm	21mm	$841.50
PP-TSP1821	TSP1821	5.5	5000	1450	27 HP Gas	16mm	21mm	$806.30

TC Series - Direct Drive

The TC series triplex plunger pumps come flanged for direct couple to electric motors. This pumps compact design has long life low and high-pressure seals, oversized bearings and sight glass. These pumps come standard with 5/8” hollow shaft and a life time warranty forged brass manifold.

Max Inlet Pressure: 125 PSI
Max Fluid Temperature: 165° F
Inlet Port Thread: 1/2”-14 BSP-F
Discharge Port Thread: 3/8”-19 BSP-F
Shaft Diameter: 16mm
Gage Port: 1/8”
Pump Dimensions: 7.8” x 7.3” x 5.5”
Max. Inlet Vacuum: 3 ft. water (2.6 in. Hg)
Crankcase Oil Capacity: 11.8 oz

Ordering Information - FREE Shipping

SKU#	MODEL	GPM	PSI	RPM	HP	BORE	STROKE	PRICE
PP-TC1504E345UI	TC1504E345UI	1.75	2700	3400	3 HP Electric	15mm	11mm	$309.90

GENERAL Pump Warranties

General Pump Repair Kit Chart

Use the General pump repair kit chart below to find the correct kit or part to repair you General pressure washer pump. Pricing is listed below the repair kit chart.

If you are not sure on the part you need for your General pump, please refer to the General pump breakdown diagrams located near each pump. If you still need further support, please send us an e-mail to info@ultimatewasher.com with your General pump model number and the part that you need.

PUMP MODEL	VALVES (6 PER KIT)	PISTON OIL SEAL	PACKINGS	PACKINGS W/ BRASS*	PISTONS*	VALVE CAP	PISTON BOLTS	HEAD RINGS	CRANK OIL SEAL
TP2530J34UIL	PP-KIT123	PP-KIT083	PP-KIT097	PP-KIT096	PP-51040009	PP-98221600	N/A	N/A	PP-90164400
EZ4040G	PP-KIT123	PP-KIT023	PP-KIT153	PP-KIT156	PP-44040266	PP-KIT124	N/A	PP-KIT155	PP-90169000
T5050	PP-KIT150	PP-KIT002	PP-KIT109	PP-KIT151	PP-47040856	N/A	N/A	PP-KIT108	PP-KIT003
TS1511	PP-KIT001	PP-KIT002	PP-KIT069	PP-KIT028	PP-47040409	PP-KIT004	PP-KIT006	PP-KIT007	PP-KIT003
TS2021	PP-KIT001	PP-KIT002	PP-KIT069	PP-KIT028	PP-47040409	PP-KIT005	PP-KIT006	PP-KIT007	PP-KIT003
TX1510G8	PP-KIT123	PP-KIT159	PP-KIT160	PP-KIT166	PP-52040009	PP-KIT124	N/A	N/A	PP-90169000
TP2530J34	PP-KIT123	PP-KIT083	PP-KIT097	PP-KIT096	PP-51040009	PP-98221600	N/A	N/A	PP-90164400
TT2035GBF	PP-KIT001	PP-KIT083	PP-KIT097	PP-KIT096	PP-51040009	PP-KIT084	N/A	N/A	PP-90164400
TX1510G8UIA	PP-KIT123	PP-KIT159	PP-KIT160	PP-KIT166	PP-52040009	PP-KIT124	N/A	N/A	PP-90169000
TX1506G8	PP-KIT123	PP-KIT159	PP-KIT160	PP-KIT166	PP-52040009	PP-KIT124	N/A	N/A	PP-90169000
TX1508G8	PP-KIT123	PP-KIT159	PP-KIT160	PP-KIT166	PP-52040009	PP-KIT124	N/A	N/A	PP-90169000
EZ3045G	PP-KIT123	PP-KIT023	PP-KIT088	PP-KIT130	PP-52040009	PP-KIT124	N/A	PP-KIT090	PP-90169000
EZ4035G34	PP-KIT123	PP-KIT023	PP-KIT153	PP-KIT156	PP-44040266	PP-KIT124	N/A	PP-KIT155	PP-90169000
TT9061EBF	PP-KIT001	PP-KIT083	PP-KIT097	PP-KIT096	PP-51040009	PP-KIT084	N/A	N/A	PP-90164400
TT9061EBFL (Left)	PP-KIT001	PP-KIT083	PP-KIT097	PP-KIT096	PP-51040009	PP-KIT084	N/A	N/A	PP-90164400
TT9071EBFL (Left)	PP-KIT001	PP-KIT083	PP-KIT097	PP-KIT096	PP-51040009	PP-KIT084	N/A	N/A	PP-90164400
TC1504E345UI	PP-KIT123	PP-KIT083	PP-KIT196	PP-KIT266	PP-60040009	PP-98221400	N/A	N/A	PP-90167500
EZ2536E	PP-KIT123	PP-KIT023	PP-KIT127	PP-KIT131	PP-44040109	PP-KIT124	N/A	PP-KIT129	PP-90169000
EZ2542E	PP-KIT123	PP-KIT023	PP-KIT127	PP-KIT131	PP-44040109	PP-KIT124	N/A	PP-KIT129	PP-90169000
TX1508S34	PP-KIT123	PP-KIT159	PP-KIT160	PP-KIT166	PP-52040009	PP-KIT124	N/A	N/A	PP-90169000
EZ2536S	PP-KIT123	PP-KIT023	PP-KIT127	PP-KIT131	PP-44040109	PP-KIT124	N/A	PP-KIT129	PP-90169000
TS1021	PP-KIT001	PP-KIT002	PP-KIT069	PP-KIT028	PP-47040409	PP-KIT004	PP-KIT006	PP-KIT007	PP-KIT003
TS4040	PP-KIT001	PP-KIT002	PP-KIT069	PP-KIT028	PP-47040409	PP-KIT004	PP-KIT006	PP-KIT007	PP-KIT003
TS2021B	PP-KIT001	PP-KIT002	PP-KIT069	PP-KIT028	PP-47040409	PP-KIT004	PP-KIT006	PP-KIT007	PP-KIT003
TS1511UR	PP-KIT001	PP-KIT002	PP-KIT069	PP-KIT028	PP-47040409	PP-KIT004	PP-KIT006	PP-KIT007	PP-KIT003
TS2021BUR	PP-KIT001	PP-KIT002	PP-KIT069	PP-KIT028	PP-47040409	PP-KIT004	PP-KIT006	PP-KIT007	PP-KIT003
TS2021UR	PP-KIT001	PP-KIT002	PP-KIT069	PP-KIT028	PP-47040409	PP-KIT004	PP-KIT006	PP-KIT007	PP-KIT003
T9281	PP-KIT001	PP-KIT002	PP-KIT109	PP-KIT112	PP-47040856	PP-KIT106	PP-KIT107	PP-KIT108	PP-KIT003
TSF2021	PP-KIT169	PP-KIT002	PP-KIT170	PP-KIT171	PP-66040009	PP-66130041	PP-66219566	N/A	PP-KIT003
TSF2219	PP-KIT169	PP-KIT002	PP-KIT172	PP-KIT173	PP-66040109	PP-66130041	PP-66219566	N/A	PP-KIT003
TSF2221	PP-KIT169	PP-KIT002	PP-KIT172	PP-KIT173	PP-66040109	PP-66130041	PP-66219566	N/A	PP-KIT003
TSF2421	PP-KIT169	PP-KIT002	PP-KIT181	PP-KIT182	PP-66040409	PP-66130041	PP-66219566	N/A	PP-KIT003
TSP1621	PP-KIT150	PP-KIT002	PP-KIT174	PP-KIT175	PP-66040209	PP-66130141	PP-66219566	N/A	PP-KIT003
TSP1821	PP-KIT150	PP-KIT002	PP-KIT180	PP-KIT176	PP-66040309	PP-66130141	PP-66219566	N/A	PP-KIT003

Valves (6 per kit)

KIT #	KIT DESCRIPTION	PRICE
PP-KIT001	Valve Kit	$46.80
PP-KIT123	Valve Kit	$65.80
PP-KIT150	Valve Kit, T5050	$186.40
PP-KIT169	Valve Kit	$180.65

Piston Oil Seals

KIT #	KIT DESCRIPTION	PRICE
PP-KIT002	Oil Seal Kit (Piston)	$10.70
PP-KIT023	Oil Seal Kit (Piston)	$22.10
PP-KIT083	Oil Seal Kit	$22.20
PP-KIT159	Oil Seal Kit (Piston)	$23.00

Packings

KIT #	KIT DESCRIPTION	PRICE
PP-KIT069	Packing Kit w/ Restop	$67.85
PP-KIT088	Packing Kit w/ Restop	$64.10
PP-KIT097	Packing Kit	$20.30
PP-KIT109	Packing Kit, 16mm	$104.70
PP-KIT127	Packing Assembly Kit	$85.20
PP-KIT153	Packing Kit	$90.50
PP-KIT160	Packing Kit, 15mm	$115.30
PP-KIT170	TSF Pumps Seal Kit, 20mm	$154.70
PP-KIT172	TSF Pumps Seal Kit, 22mm	$154.70
PP-KIT174	TSF Pumps Seal Kit, 16mm	$169.25
PP-KIT180	TSP181 Seal Kit, 18mm	$188.99
PP-KIT181	Seal Kit	$134.75
PP-KIT196	Packing Kit	$65.20

Packings w/ Brass
* Need 3 per pump

KIT #	KIT DESCRIPTION	PRICE
PP-KIT028	Packing Assembly Kit, 20mm	$34.40
PP-KIT096	Packing Kit	$16.40
PP-KIT112	Long Packing Kit	$120.10
PP-KIT130	Packing Assembly Kit	$63.65
PP-KIT131	Long Packing Kit	$77.60
PP-KIT151	Packing Kit	$88.30
PP-KIT156	Long Packing Kit	$96.50
PP-KIT166	Kit	$67.10
PP-KIT171	Packing Assembly Kit, 20mm	$113.99
PP-KIT173	Packing Assembly Kit, 22mm	$113.99
PP-KIT175	Packing Kit, 16mm	$116.35
PP-KIT176	Packing Kit, 18mm	$120.25
PP-KIT182	Packing Kit, 24mm	$113.95
PP-KIT266	Packing Assembly Kit, 15mm	$77.90

Pistons
* Need 3 per pump

KIT #	KIT DESCRIPTION	PRICE
PP-44040109	Plunger	$61.55
PP-44040266	Plunger	$101.40
PP-47040409	Plunger	$53.20
PP-47040856	Plunger	$88.40
PP-51040009	Plunger	$41.80
PP-52040009	Plunger	$48.30
PP-66040009	Plunger, 20mm	$48.30
PP-66040109	Plunger	$96.85
PP-66040209	Plunger	$92.80
PP-66040309	Plunger	$92.80
PP-66040409	Plunger	$96.85

Valve Caps

KIT #	KIT DESCRIPTION	PRICE
PP-KIT004	Valve Cap Kit	$79.30
PP-KIT005	Valve Cap Kit	$129.20
PP-KIT084	Valve Cap Kit	$81.90
PP-KIT124	Valve Cap Kit, EZ	$74.90
PP-66130041	Valve Cap Kit	$40.25
PP-98221400	Valve Cap Kit	$21.65
PP-98221600	Valve Plug, TP2530	$13.20

Piston Bolt

KIT #	KIT DESCRIPTION	PRICE
PP-KIT006	Plunger Bolt Repair Kit	$35.55
PP-66219566	Plunger Bolt	$39.85

Head Rings

KIT #	KIT DESCRIPTION	PRICE
PP-KIT007	Head Ring Kit	$15.60
PP-KIT090	Head Ring Kit	$12.20
PP-KIT108	Repair Kit	$10.70
PP-KIT155	Head Ring Kit	$11.50
PP-KIT129	Head Ring Kit, 18mm	$13.45
PP-KIT155	Head Ring Kit	$11.50

Crankshaft Oil Seals

KIT #	KIT DESCRIPTION	PRICE
PP-KIT003	Crankshaft Oil Seal Kit	$19.70
PP-90164400	Oil Seal	$12.30
PP-90167500	Oil Seal	$21.80
PP-90169000	Oil Seal	$19.70
PP-90167500	Shaft Seal, TH Pump	$21.80

Packing Extractor Kit

Kit includes: Comes with handy carrying case, and includes a slide hammer, 13mm, 15mm, 18mm, 20mm, and 24 sockets.

(Shipping charge of $7.95 will apply on this item if the total order is less than $59.00)

MODEL	DESCRIPTION	PRICE
BN-4030	Packing Extractor Kit	$30.95
BN-4012	Slide Hammer	$29.60
BN-4029	13mm Socket	$19.00
BN-3640	15mm Socket	$19.00
BN-4084	16mm Socket	$19.00
BN-4194	18mm Socket	$19.00
BN-4041	20mm Socket	$19.00
BN-5936	22mm Socket	$19.00
BN-5378	24mm Socket	$19.00
BN-1628	Carrying Case	$16.90
BN-1189	Socket Screw	$13.55
BN-3859	Slide Pin	$17.40

Packing Insertion Kit

Plastic insertion tools for reassembly of packings in General Pumps. May also be used in other manufacturers' pumps. Tools for 20mm, 22mm, 24, packings.

(Shipping charge of $7.95 will apply on this item if the total order is less than $59.00)

MODEL	DESCRIPTION	PRICE
BN-4030	Packing Insertion Tool Kit	$30.95

Service Video

General Pump Service Video

This is a 30 minute video in DVD format showing how to properly service a General Pump. Excellent training tool for new employees, or those not familiar with repairing General Pumps.

Ordering Information - FREE Shipping

MODEL	DESCRIPTION	PRICE
BN-3881	General Pump Service DVD	$49.95

General Pumps - The High Ranking Pump

A General pressure washer pump is the ideal choice for medium flow applications utilizing high pressure ratings. But that’s not all that these pumps are known for since they produce several models with a wide range of capacities. These pumps use high-grade materials and excellent engineering to produce a product that is a leader in the industry for medium duty pumps.

General pumps are ideal for medium duty applications such as cleaning exterior siding, patios, decks and asphalt. The larger more powerful General pump, like the TS and T series, can handle industrial and heavy construction applications. In fact, the most powerful models can be used for hydro drilling and root cutting. Their standard construction consists of ceramic plungers and a standard brass manifold that allows the pump to operate very smoothly.

The TP and EZ/TX series of General pumps are smaller pumps designed for medium flow rates at pressure ratings ranging from 2000 to 2500 psi. Featuring flow rates of 3 or 4 gallons per minute these pumps are ideally suited for power washing operations. Each General pressure washer pump comes equipped with gas powered engines that produce 5.5 to 13 HP. Although the standard manifold is constructed of brass consumers have the option of selecting aluminum or stainless steel as well.

The TS and T Series of General pumps are known for producing high pressure ratings coupled with high flow rates. Given their capacity for producing up to 5000 psi at 5 gallons per minute make them the ideal choice for jobs where large capacities are required. Their use of high quality materials along with precise engineering make these pumps leaders in the heavy duty sector. To achieve performance ratings such as these, 11 to 24 HP gas engines are the power plant of choice for these models.

A General pump is a pump you can count on if you need to produce high flow rates under high pressure ratings. Given their incredible power capacity these models are relatively inexpensive since they only cost a few hundred dollars. If you’re a business owner looking to explore some of the alternatives applications that your pressure washer system can handle then these are the pumps for you. After all, if you’ve got a project that you know is going to be a tough battle, it’s always nice to know you have a general on your side.

Can we improve something on this page?

Can this page be improved? Is the information complete and easy to understand? We are always looking to improve our website, so please feel free to give us your comments, suggestions, or questions. Thanks for helping us serve you better!

General Pressure Washer Pumps

Can we improve something on this page?