Industrial Duct Cleaning Units

 

Cleaning your systems from dust

Duct Cleaners are specially designed to clean Ducts, Trash-Chutes, Vents, Restaurant Hoods, Tanks and more. This is the perfect accessory for any hot or cold pressure washer. Made of corrosion-resistant materials and stainless steel self-lubricated bearings. The new and improved carbide swivel offers the highest quality Swiss made craftsmanship.

Air Duct Cleaners for quick and easy cleaning of: Ducts, Vents, Pipes, Kegs, Chutes, Chimneys, Gutters, Barrels, Containers, Drains, Hoods...

  • All Duct Cleaners come with 3/8" NPTF water inlet.
  • Requires two 1/8“ Nozzles which are sold separately.
  • Other versions and sizes available

Use this handy table to determine which duct cleaner is the best for your application.

Hood Exhaust Vent Width Use this Duct Cleaner
4" - 6" 3" diameter
7" - 12" 6" diameter
13" - 16" 12" diameter
17" - 20" 16" diameter
21" - 24" 20" diameter
25" - 36" 24" diameter

duct clean application
Small Duct Cleaning with 2 Spinning Nozzles

hood duct cleaner
Entering Duct Area

To find the replacement parts for your rotary duct cleaner, check our Chart.

Duct Cleaners

Small Duct Cleaner
3" and 6"

restaurant hood cleaning
12" and 24"

Fixed Duct Cleaner

The complete stainless versions of these various cleaning units are specially designed for use with water and cleaning additive at high r.p.m.
Non adjustable arms. Perfect for vertical chutes.

Features:

  • 2 Spray Nozzles 1/8" NPT
  • Throughput Medium: water, cleaning additive pH 3-12
  • Pressure: 4000 PSI
  • Temperature: 40°F - 250°F
  • R.P.M.: 2000
  • Flow Rate: depending on pump performance(10 GPM Max)
  • Body: DYG: Carbide, Double Bearings
  • Head: brass, nickel plated
  • Rotor Guard: stainless steel
  • Nominal Width: NW 1/4"
  • 1/8" Meg Nozzles are not included (will be determined based on your PSI and GPM)
  • Rotary Duct Cleaner Replacement Parts

(Remember once you determine the orifice size of the nozzle, you will need to divide that number by the quantity of nozzles need for the attachment. For example, if you are using a machine with 4000 PSI and 4 GPM, that indicated a size 4.0 orifice. If your attachment requires 2 nozzles, you divide 4.0 by 2 and each duct cleaning nozzle should be 2.0. If dividing it does not make a whole number, round the number up to the next size. See spray nozzle chart for selection help.)

Ordering Information - FREE SHIPPING

MODEL DIAMETER HEIGHT PRICE
MO-81-406 3" 2.4" $342.10add to cart
MO-81-426 6" 2.8" $426.40add to cart
MO-81-456 12" 2.8" $438.00add to cart
MO-81-466 16" 2.8" $451.00add to cart
MO-81-476 20" 2.8" $498.70add to cart
MO-81-486 24" 2.8" $510.30add to cart

Adjustable Duct Cleaner
3" and 6"

Wide Duct Cleaner
12" and 24"

Adjustable Duct Cleaners

The complete stainless versions of these various cleaning units are specially designed for use with water and cleaning additive at high r.p.m.
Adjustable arms allow different spray angles. Perfect for 360?? cleaning.

Features:

  • 2 Spray Nozzles 1/8" NPT *adjustable*
  • Throughput Medium: water, cleaning additive pH 3-12
  • Pressure: 4000 PSI
  • Temperature: 40°F - 250°F
  • R.P.M.: 2000
  • Flow Rate: depending on pump performance(10 GPM Max)
  • Body: DYG: Carbide, Double Bearings
  • Head: brass, nickel plated
  • Rotor Guard: stainless steel
  • Nominal Width: NW 1/4"
  • 1/8" Meg Nozzles are not included (will be determined based on your PSI and GPM)

(Remember once you determine the orifice size of the nozzle, you will need to divide that number by the quantity of nozzles need for the attachment. For example, if you are using a machine with 4000 PSI and 4 GPM, that indicated a size 4.0 orifice. If your attachment requires 2 nozzles, you divide 4.0 by 2 and each nozzle should be 2.0. If dividing it does not make a whole number, round the number up to the next size. See spray nozzle chart for selection help.)

Ordering Information - FREE SHIPPING

MODEL DIAMETER HEIGHT PRICE
MO-81-506 3" 2.4" $436.50add to cart
MO-81-526 6" Most Popular 2.8" $472.70add to cart
MO-81-556 12" 2.8" $484.30add to cart
MO-81-566 16" 2.8" $495.90add to cart
MO-81-576 20" 2.8" $543.50add to cart
MO-81-586 24" 2.8" $556.50add to cart

Duct Cleaner Frame
TYR Mobile

TYR Mobile

The complete stainless versions of this frame has side to side and height adjustable. This is the perfect tool for horizontal duct cleaning. This mobile cart prevents the duct cleaner from bouncing against the sides of the wall. It can be used with all duct cleaners on this page. 8 wheels allow easy sliding inside the duct. All stainless steel construction cart can be resized (weight and height) depending on your needs.

Ordering Information - FREE SHIPPING

MODEL SIZE DIMENSIONS WEIGHT PRICE
MO-81-902 for 3" to 16" Duct Cleaner 15.3" L
11.8 to 17.71"W
11.8 to 16.4" H
9.5 lbs $410.10add to cart
MO-81-903 for 20" to 24" Duct Cleaner 15.3" L
11.8 to 17.71"W
11.8 to 16.4" H
15.6 lbs $513.11add to cart

Duct Cleaners

Jetter Nozzle

Rotating Nozzle

Adds extra agitation, handle up to 3000 PSI. Back jet only. Size 5.5.

(Shipping charge of $8.95 will apply on these items if the total order is less than $69.00)

MODEL DESCRIPTION PRICE
200049700 for 3" to 16" Duct Cleaner $42.25add to cart

Silo Cleaners

Adjustable Duct Cleaner
Vertical Silo Cleaner

Vertical Silo Cleaner

The Vertical Silo Cleaner is a self guiding cleaning device for any type of surface. Slowly lower and raise the cleaner inside the silo and the self rotating arm will evenly clean the surface. Adjustable guides and interchangeable spray arms, make this the perfect tool for cleaning silos ranging from 7'-12' in Diameter. This cleaner is equipped with high RPM Swivel features reinforced self-lubricating stainless steel ball bearings and dual spring-based carbide seal sliding rings for long-lasting operation under tough conditions. Four 5" solid rubber wheels assure safe guidance inside the silo and keep to rotor arm at the right cleaning distance.

Features:

  • Maximum Pressure: 5000 PSI
  • Maximum Flow: 40 GPM
  • Maximum Temperature: 250°F
  • 1 X Adjustable Guide Rack
  • 1 X High RPM Swivel
  • 5" x 4" Solid Rubber Wheels
  • 3 sets of Spray Arms included:
    1 x 6' 7" Spray Arm
    1 x 8' 2" Spray Arm
    1 x 9' 10" Spray Arm
  • Stainless Steel Swivel
  • Spray Nozzles sold separately
  • Lowering device and winch Not included

Ordering Information - FREE SHIPPING

MODEL DIAMETER PRICE
MO-81-910 Self Guiding Vertical Silo Cleaner $436.50add to cart

Copy and enter "MODSC01" at checkout

Manhole Cleaners

Manhole Cleaner

These are all stainless steel construction that has debris shield to prevent arm damages and a safety cage to prevent impact with surfaces. It is designed to fit 16" to 24" manhole openings and used in conjuction with hot or cold water pressure washer to remove dirt and grime.

Features:

  • Max Pressure: 5000 PSI (350 bar)
  • Max Temperature: 248 °F
  • Construction: All Stainless Stell
  • Sizes: 16" or 24" (depending on model)
  • Self rotating Rotor Arm
  • Inlet Swivel: 1/4" or 3/8" NPT Water Port (depending on model)
  • Maintenance Free
  • 1/8" 5.0 Degree MEG Nozzle NOT included

Ordering Information - FREE SHIPPING

MODEL DESCRIPTION WATER INLET PRICE
MO-81.916 16" Manhole Cleaner 1/8" $625.72add to cart
MO-81.917 24" Manhole Cleaner 3/8" $750.87add to cart

Copy and enter "MODSC01" at checkout

Tote and Trash Can Cleaners

Tote and Trash Can Cleaner New!

Used in connection with a pressure washer, this is a turn-key solution for cleaning 360 degrees inside your containers. Simply flip the container upside down centered over the cleaning head, and turn the ball valve to open position to let water through and clean. Turn off the ball valve to make easy change out of another container to clean. Use the optional foot valve for added convenience to allow operator to have both hands free while cleaning.

Package comes complete including washing frame, rotating cleaning head, and nozzles. It is ready to operate upon arrival.

Action Shots of this product
  • Action Shot 1
  • Action Shot 1
  • Rotating Cleaning Head



Click pictures for large views

Benefits of using specialized cleaning nozzles

  • Quicker turnaround
  • Increased productivity
  • More efficient use of labor
  • Eliminating human error
  • Safer
  • Lower costs
  • Sustainability
  • Improved product quality
  • Minimum maintenance
  • Reduce the likelihood of cross-contamination between batches

Features:

  • Pressure: 580-2300 PSI
  • Flow Rate: 5-13.2 GPM
  • Temperature: Max 195 °F
  • 3 Spray Nozzles 1/8" NPT
  • R.P.M.: 2000
  • Body: Stainless Steel and Anti-Corrosive Aluminum
  • Measures 48"L x 40"W x 6"H
  • Weight: 60 lbs

Ordering Information - FREE SHIPPING

MODEL DESCRIPTION PRICE
AQTOTECL Tote and Trash Cleaner Complete Assembly with Ball Valve $3,840.00add to cart
AQFTVLV Optional Foot Valve (in place of ball valve) $150.00add to cart

Rotary Duct Cleaner Replacement Parts

DIAMETER HEAD 2 NOZZLE 3 NOZZLE CAGE 1/4" INLET 3/8" INLET
3" Non Adjustable Head MO-900.150 MO-900.564   MO-33.063 cold MO-33.163 cold
      MO-900.859    
Adjustable Head MO-900.550 MO-900.552   MO-57.063 hot MO-57.163 hot
6" Non Adjustable Head MO-900.571 MO-900.580   MO-33.063 cold MO-33.163 cold
      MO-900.861    
Adjustable Head MO-900.551 MO-900.553   MO-57.063 hot MO-57.163 hot
12" Non Adjustable Head MO-900.572 MO-900.554   MO-33.063 cold MO-33.163 cold
      MO-900.864    
Adjustable Head MO-900.573 MO-900.555   MO-57.063 hot MO-57.163 hot
16" Non Adjustable Head MO-900.868 MO-900.870   MO-33.063 cold MO-33.163 cold
      MO-900.865    
Adjustable Head MO-900.869 MO-900.871   MO-57.063 hot MO-57.163 hot
20" Non Adjustable Head MO-900.589 MO-900.872   MO-33.063 cold MO-33.163 cold
      MO-900.866    
Adjustable Head MO-900.706 MO-900.873   MO-57.063 hot MO-57.163 hot
24" Non Adjustable Head MO-900.874 MO-900.876   MO-33.063 cold MO-33.163 cold
      MO-900.867    
Adjustable Head MO-900.875 MO-900.877   MO-57.063 hot MO-57.163 hot
  Copper washer for adj

Banjo Bolt (flow thru)
arm case for 3" , 12", 16"
arm case for 6"
o-ring for G3/8
MO-900.170 (2 washers req.)
MO-900.171
MO-900.172
MO-900.175
MO-37997
       
2 Nozzles
MODEL DESCRIPTION PRICE
MO-900.150 3" Non Adjustable Head $57.50add to cart
MO-900.550 3" Adjustable Head $111.50add to cart
MO-900.571 6" Non Adjustable Head $78.10add to cart
MO-900.551 6" Adjustable Head $109.90add to cart
MO-900.572 12" Non Adjustable Head $52.40add to cart
MO-900.573 12" Adjustable Head $106.30add to cart
MO-900.868 16" Non Adjustable Head $53.10add to cart
MO-900.869 16" Adjustable Head $107.00add to cart
MO-900.589 20" Non Adjustable Head $54.20add to cart
MO-900.706 20" Adjustable Head $108.50add to cart
MO-900.874 24" Non Adjustable Head $55.30add to cart
MO-900.875 24" Adjustable Head $109.40add to cart
MO-900.170 Copper Washer (2 washers required) $3.90add to cart
MO-900.171 Banjo Bolt $16.90add to cart
MO-900.172 Arm Case for 3", 12" 16" $12.50add to cart
MO-900.175 Arm Case for 6" $18.20add to cart
MO-37997 O-ring for G3/8 $4.80add to cart
3 Nozzles
ITEM # DESCRIPTION PRICE
MO-900.564 3" Non Adjustable Head $67.00add to cart
MO-900.552 3" Adjustable Head $117.80add to cart
MO-900.580 6" Non Adjustable Head $88.30add to cart
MO-900.553 6" Adjustable Head $115.50add to cart
MO-900.554 12" Non Adjustable Head $63.20add to cart
MO-900.555 12" Adjustable Head $111.50add to cart
MO-900.870 16" Non Adjustable Head $58.90add to cart
MO-900.871 16" Adjustable Head $112.00add to cart
MO-900.872 20" Non Adjustable Head $60.10add to cart
MO-900.873 20" Adjustable Head $114.40add to cart
MO-900.876 24" Non Adjustable Head $60.40add to cart
MO-900.877 24" Adjustable Head $114.90add to cart
Cages
ITEM # DESCRIPTION PRICE
MO-900.859 3" Cage $101.40add to cart
MO-900.861 6" Cage $167.90add to cart
MO-900.864 12" Cage $183.90add to cart
MO-900.865 16" Cage $200.70add to cart
MO-900.866 20" Cage $222.90add to cart
MO-900.867 24" Cage $230.60add to cart
Inlets
ITEM # DESCRIPTION PRICE
MO-33.063 1/4" Inlet cold $111.30add to cart
MO-57.053 1/4" Inlet hot $206.80add to cart
MO-33.163 3/8" Inlet cold $111.30add to cart
MO-57.153 3/8" Inlet hot $206.80add to cart

alt tag
Air Duct Cleaning Operations

What is "Duct Cleaning" and why is it important?

See our articles and tips on restaurant duct cleaning and exhaust cleaning.

Air Duct cleaning generally refers to the cleaning of various heating and cooling system components of forced air systems, including the supply and return air ducts and registers, grilles and diffusers, heat exchangers heating and cooling coils, condensate drain pans (drip pans), fan motor and fan housing, and the air handling unit housing.

If not properly installed, maintained, and operated, these components may become contaminated with particles of dust, pollen or other debris. If moisture is present, the potential for microbiological growth (e.g., mold) is increased and spores from such growth may be released into the home's living space.

(Source http://allergies.about.com/library/blairduct01.htm)